My Thesis Name Is Thyristor Firing Circuit This Thesis Is Regarding The Development 2382876

My thesis name is Thyristor firing circuit.This thesis is regarding the development of new firing circuit to fire a SCR in its on state.So the thing is we have a thyristor firing circuit in our practical lab of SCR (model number-cs30-12io1 s1222).we need to develop a new firing scheme which is better than available firing scheme. we need to list the number of available component that can be used to make the new thyristor firing circuit and have to mention all advantages and disadvantages of those component.These old firing scheme and new firing scheme needs to be used tested with different experiment model as I will provide them in the attachment.THese experiments need to be performed with new firing and old firing circuit.I will be providing you with the simulink model. u can use multisim software for that.THE model you will develop will be used. to prepare kit in the practical laboratory.U need to use Harvard style reference in the text and in the normal referencingI have attached the sample report so you will get the idea how you gonna make reportI have also completed chapter one of the report so u can uses in but make sure you parapphasre and then add reference to themreport should be divided into 4or 5 chapterChapter 1 introductionchapter two simulation of the available thyristor firing circuit with wave graph and dicusiing about themchapter 3.avaiable componet which can be used to make new firing circuit and discuss about them and their advantages and disadvantageschapter four-proposed circuit diagram for the thrysitor firing circuit and its simulation and running it for the same two experiment in chapter 2chapter 5 comparison results conclusion
the model developed should be in accordance with the SCR model no cs30-12io1 s1222 u can get the data sheet on linewell u can uses Matlab or multisim for this project

Document Preview:

Estimating frequency for different time-frequency analysis methods using Matlab® Minor Thesis Report By Muhamad Zuhaili Khairul Anuar Id No: 110163661 Bachelor in Technology Electrical Engineering Master in Engineering Electrical Power Supervisor: Mr Kevin Rogers School of Engineering University of South AustraliaABSTRACT Signal processing is crucial in the electrical industry as obtaining quality results from the process is an important task. This leads to enhancing the proper methods to analyse variety of signals and to utilise the information in the signals. One of the analysis in signal processing is time-frequency analysis. This analysis provides two dimensional views in time and frequency domains as representation of signals. Results obtained in the time-frequency analysis need to be accurate in order to be used in a particular field. Thus, in this thesis, an accuracy of four different methods of time-frequency analysis was investigated. The methods are Wigner-Ville Distribution (WVD), Pseudo Wigner-Ville distribution (PWVD), Smooth Pseudo Wigner-Ville distribution (SPWVD) and Spectrogram (SPEC). These four methods are compared to each other and are analysed in terms of their performances and capabilities referring to the peak frequency estimation. MATLAB® software and time-frequency toolbox are applied to generate signals and help the simulation process. This research has been conducted through simulations and tested using four different types of signals which are sinusoidal sine wave, signal with linear frequency modulation, signal with constant frequency modulation, and signal with sinusoidal frequency modulation. These signals are tested in three conditions, which are signal with no noise, signal with low standard deviation of noise (from 0.05 to 0.30 standard deviation of noise) and signal with high standard deviation of noise (from 0.35 to 0.75 standard deviation of noise). Each method is repeated a hundred…

Attachments:

Khamy054-Repo….pdfavailabe-thyr….jpgCHAPTER-1.docxPrac-1-Uncont….docxPrac-2-Contro….docx

Prof. Angela

4.6/5

Calculate Price


Price (USD)
$